Wall Mount for Tenor Sax BRECKER

Its bow support is adjustable over 13 to 20 cm or 5 to 8 inches measured from the center of the upper bracket. This has proven to be an ideal distance for most tenor saxophones to avoid valves and other parts. For the padding we chose a high-friction compound rubber tubing. It keeps a firm grip on any polished metal surface. The upper bracket has a 6 mm. steel core welded firmly on the saxstand's body. Don't be afraid to bend it a little to get a perfect fit, but only by hand ! The round wall plate has a thickness of 3 mm. and the same number of holes for solid mounting. Wallplugs, screws, are supplied as usual, as well as black screw covers for that finishing touch!

Our wallmounts go to countries all over the world!

We recommend tracking your shipment on this website: tracking.postnl.nl

United States zone
Standard Shipping 0-2 kg $ 36.95
Free Shipping over $ 350
DHL Express Delivery 0-2 kg $ 159.95

Canada, Australia + Rest of the World zone :
Standard Shipping 0-2 kg $ 44.95
Free Shipping over $ 350
DHL Express Delivery 0-2 kg $ 159.95

Netherlands zone :
Standard Shipping 0-2 kg € 6.95
Free Shipping over € 200
DHL Express Delivery 0-2 kg $ 44.95

Belgium / Germany zone :
Standard Shipping 0-2 kg € 16.95
Free Shipping over € 250
DHL Express Delivery € 74.95

Europe with € Zone : Austria, Finland, France, Greece ,Ireland, Italy, Portugal, Spain etc. 
Standard Shipping 0-2 kg  € 24.95
Free Shipping over € 300
DHL Express Delivery 0-2 kg € 94.95

Europe without € Zone : UK, Switzerland and other European Countries*
Standard Shipping 0-2 kg  $ 29.95
Free Shipping over $350
DHL Express Delivery 0-2 kg $ 125.95

We recommend tracking your shipment on this website: tracking.postnl.nl

(* Bosnia & Herzegovina, Bulgaria, Croatia, Czechia, Denmark, Georgia, Guernsey, Gibraltar,  Guernsey, Jersey Hungary, Jersey, Poland, Romania, Serbia, Sweden, Switzerland, United Kingdom etc.

First, please check if the bell of your saxophone fits properly into the padded fork. As it is right now it will fit most Tenors nicely, but there are always exceptions to the rule.
If it doesn’t lower into the top bracket fully, you can gently pull it apart a little by hand. Do not put in a vice or use tools on it since that could damage the stand.

Furthermore you should decide how you want your instrument to ‘sit’ in it. You could hold it up in front of the wall with your instrument in it in the preferred position, have someone else mark the holes and mount the stand accordingly.
The bow support is adjustable to keep it from interfering with keys or protection brackets of course, but may also be used to slightly alter the angle of your instrument once the stand is mounted.

Especially with drywall it is of utmost importance to find a spot that offers solid footing for the screws, and has a stud or beam directly behind it. For stone walls you will have to drill holes with a maximum ¼ inch drill bit and insert the wallplugs and screws. The little caps are to cover the screws. Put hem on the tip of your forefinger and place them over the screw’s head. Then, with a twisting movement of your finger feel for their proper position over the slot, then just push them in. Use some glue if all else fails.
If you use a cordless drill for the screws, make sure its chuck doesn’t damage the coating.

If for some reason you are not sure how or where to mount it, please contact us or get some professional help!

To keep the rubber in good shape you could occasionally put a little bit of silicone spray on a soft cloth and give it a gentle rub.

Fine steel and high friction rubber, plastic knob and finishing caps.

To keep the rubber in good shape you could occasionally rub it with a dash of silicone spray and a microfibre cloth. This also keeps its color dark and lush.